Powered Paragliding New Brunswick - How to exchange or tighten belt on WJ paramotors.

If you need to exchange or tighten reduction belt on your Walkerjet follow these simple instructions:

Loosen the hex key bolt on top of the reduction assembly.

Place hex key wrench inside of the larger pulley and turn to drop the large pulley down to loosen the belt or turn to tighten the belt.

IMPORTANT: Make sure that if your prop turns counter clockwise the large pulley will be positioned more to the left if you face prop. If you machine turns prop clockwise make sure it is  more to the right. 

Once belt is tight or replaced. Tighten the top hex key bolt to lock the large pulley assembly in place.

Good luck.    Andre